Orange Pi 3 LTS Setup Guide | Device setup
Orange Pi 3 LTS Setup Guide
The Orange Pi 3 LTS is a highly compact, open-source single-board computer equipped with dual-band WiFi and Bluetooth 5.0. It can run Ubuntu, Android10, or Debian distributions.
Follow this guide to set up your Orange Pi 3 LTS to run viam-server.
Hardware requirements
- Development machine: laptop or computer workstation
- An Orange Pi 3 LTS
- A 5V 3A power supply with a USB-C connector
- A micro-SD card (TF card): Minimum of 8GB, 16GB recommended
- SD card reader (recommended with USB-C connector)
- A monitor: for display
- HDMI cable: to connect Orange Pi to monitor display
- USB keyboard and mouse
- USB-C to USB-A cables: to connect keyboard and mouse to USB hub or Orange Pi ports (recommended, hardware dependent)
- USB hub with USB-A connector (recommended)
Power your Orange Pi 3 LTS
Before you power the board, you need to install an operating system.
- First, download an Orange Pi 3 LTS Ubuntu image to your development machine. We recommend
ubuntu_jammy_desktop. - Unzip the image.
- Insert the micro-SD card into the SD card reader and connect the reader to your development machine.
- Follow the Orange Pi guide to prepare your microSD card to flash the OS to your micro-SD card using balenaEtcher.
- Insert the micro-SD into the Orange Pi.
To power your Orange Pi 3 LTS, connect your power adapter to the LTS’s USB-C port. The LED should light up, which indicates that the board is powered.
To connect to a display, connect the HDMI cable to the Orange Pi’s HDMI port and the other end to your monitor. Then, connect your keyboard and mouse to the two USB-A ports on your Orange Pi. Alternatively, you can connect your peripherals to a USB hub and connect the USB hub to your Orange Pi’s USB-A port.
Once the Orange Pi successfully boots, you should be greeted with the Orange Pi desktop display. If you are prompted for a login password, note that the default password for Orange Pi devices is “orangepi”.
Establish a network connection
The Orange Pi 3 LTS comes equipped with a wireless network antenna. To connect to WiFi through the desktop, click on the WiFi icon in the top right of the monitor display, select your preferred network or hotspot, and enter the password.
Next steps
You have now installed an operating system on your Orange Pi. To use your Orange Pi, follow the setup guide:
If you want to use the GPIO pins on the board, add a orangepi board as a component after installing viam-server.
Troubleshooting
If you are prompted for a password in the terminal, the default password for Orange Pis is “orangepi”.
Visit the Orange Pi Forum for troubleshooting tips and tricks specific to the Orange Pi.